Table of Contents
Advertisement
Chapter
12
About scanning images
You can scan images from the machine to a computer, and save them in JPEG, TIFF, or Bitmap
format. And you can process that data by using the supplied application software to create original
images. Furthermore, you can use the supplied OCR (Optical Character Recognition) software to
convert scanned paper documents to text data.
Before scanning
Before scanning images, confirm as follows:
Is the software (MP Drivers and MP Toolbox) installed?
If the software is not yet installed, see Software Guide.
Does the document to be scanned meet the requirements for setting on the platen glass?
For details, see page 31.
IMPORTANT
• After turning the machine ON, or after recovering from Power Save mode (see page 134), the image
may not be correctly read by the machine. Wait at least one minute before scanning.
Scanning methods
There are three methods of scanning images to your computer:
Using the MP Toolbox (See page 120.)
Using a TWAIN- or WIA- (Windows XP only) compliant Windows application software
(See page 121.)
Scanning with the operation panel of the machine (See page 122.)
This section explains how to scan using these methods.
IMPORTANT
• While the machine is scanning images to the computer, or the computer is in the sleep mode or standby
mode, do not disconnect and connect the USB cable.
Chapter 12
PC
Scanning
119
Scanning
Advertisement
Table of Contents
