AvMap Geosat 6 APRS Function Manual page 34

APRS Functions
Screen # Item
2-1
CALL SIGN
2-2
GPS UNIT
2-3
WAYPOINT
2-5
POS AMBIGUITY
2-7
POS LIMIT
2-B
PACKET PATH
2-C DATA TX
2-D
PACKET TRANSFER INTERVAL
2-N PACKET SPEED
Making it all work!
a. Make sure both the Kenwood TH-D7 and AvMap
Geosat 6 APRS are turned OFF!
b. Connect the four pole 2.5mm communication cable
end to the serial port of the Geosat 6 APRS and the
34 - AvMap
Select/Enter
{your call sign}
{NEMA96}
{9 DIGITS NEMA}
{OFF}
{OFF}
{WIDE1-1,WIDE2-2}
{AUTO}
{3 MIN.} NOTE: Smaller times (<5min) are for mobile units while
stationary stations will use longer times (~10 min. and up)
{1200 bps}
three pole 2.5mm end to the D7A's GPS receptacle.
IMPORTANT! These are easily reversed and hooked
up backwards; also when connecting to the Geosat
6 APRS make sure you plug into the serial port, not
the audio input.