AvMap Geosat 6 APRS Function Manual page 32

APRS Functions
Check for a good click into the unit.
c. NOW POWER UP BOTH UNITS!
d. If your Kenwood D700 powers up in VFO mode
(voice communications) push and hold the [F] button
for 1 second and then push the [TNC] button. This
will place your D700 in {TNC APRS} mode.
e. DOES IT WORK?? You will know you have done it right
when you see {GPS} blinking at the top of your D700
screen and {1200} just to the right of that constantly
on. The blinking GPS means that your GEOSAT 6 APRS
is 'TALKING' to your D700!
f. To begin transmitting your position push and
hold the [F] button for 1 second and then push the
[Beacon] button.
32 - AvMap