Confirm The Heading Sensor Operation; (Heading Sensors Only [As Gps Hs]) - Humminbird AS GR50 Installation Manual

Turn On/Off NMEA Output
HELIX Series
1. Press the MENU key twice.
2. Select Setup tab > NMEA Output.
3. Press the RIGHT or LEFT Cursor keys to select On or Off. (Default = Off)
NOTE: The menu option in your Fishing System will be called NMEA 0183 Output
or NMEA Output. If the menu option is not shown under the Setup tab, make sure
the User Mode is set to Advanced (Setup tab > User Mode > Advanced).
SOLIX Series
1. Press the HOME key.
2. Select Settings > Network > NMEA 0183 > NMEA 0183 Output.
3. Tap the on/off button.
6

Confirm the Heading Sensor Operation

.

(Heading Sensors only [AS GPS HS])

It is important to confirm that the Heading Sensor is installed correctly by
reviewing the heading digital readout.
NOTE: This procedure should be performed at slow speeds, in calm, open water,
in a large area that is far from shallow water, boats, or other obstacles.
HELIX Series
1. Press the MENU key twice to open the Main Menu.
2. Select Navigation tab > North Reference > Magnetic.
3. Press the EXIT key.
4. Select Setup tab > Select Readouts.
NOTE: If the Select Readouts menu option does not appear under the
Setup tab, change the User Mode to Advanced. Select Main Menu
> Setup tab > User Mode > Advanced.
Installation 22