Storing The Device When Not In Use; Environmental And Waste Disposal Information - Silvercrest SRD 600 B1 Operating Instructions And Safety Instructions

SilverCrest SRD 600 B1
 Re-insert the retainer for the shaver
heads into the shaver unit.
 Carefully turn the lock against the
direction of the arrow until the
retainer for the shaver heads is
secured in place.
 Fold in the cutter system [1] until you hear it click into place.
 Place the protective cover [1] back on the cutter system. Ensure that the wide tab of the protective
cover is aligned above the unlock button [2].

9. Storing the device when not in use

If the shaver is not going to be used for a long period of time, clean as described in the section "8.1
Cleaning". Place the protective cover on the cutter system [1] in order to protect against damage. Ensure
that the wide tab of the protective cover is aligned above the unlock button [2]. To help maintain the
battery performance, you should charge it at regular intervals. Keep the shaver and its accessories in a
clean, cool, dry place, such as the travel bag.

10. Environmental and waste disposal information

Devices marked with this symbol are subject to the European Directive 2012/19/EU.
Electrical and electronic equipment must not be put in the household waste, but must be
disposed of via designated public disposal centres. By properly disposing of the old
device, you can avoid environmental damage and hazards to health. Further
information regarding disposal of the old device can be obtained from your local
authority or the shop where you purchased the device.
18 - English