Maintenance; Storing The Device When Not In Use/Travel Lock; Troubleshooting; The Hair & Beard Trimmer Doesn't Seem To Be Working - Silvercrest SHBD 600 A1 Operating Instructions And Safety Instructions

SilverCrest SHBD 600 A1

8.2. Maintenance

The blade block (1) of the hair & beard trimmer is subject to constant wear resulting from use.
To keep wear to a minimum and keep the blades sharp, the blade block should be cleaned
and oiled after use every time.

8.3. Storing the device when not in use/travel lock

If the hair & beard trimmer is not going to be used for a long period of time, clean
as described in the "Cleaning" section.
To help maintain the battery performance, you should charge it at regular intervals.
Keep the hair & beard trimmer in a clean, cool, dry place. If necessary, activate
the travel lock.
To prevent it from switching on unintentionally, the hair & beard trimmer has a
travel lock function:

Press and hold the On/Off button (3) for approximately five seconds to
activate the travel lock function.

Press and hold the On/Off button (3) for approximately five seconds to
deactivate the travel lock function. The travel lock is also deactivated
by connecting the mains adapter (6).

9. Troubleshooting

9.1. The hair & beard trimmer doesn't seem to be working

The built-in battery is empty. Charge the battery.

Ensure that the socket, into which the mains adapter (6) is plugged, is receiving power. If
necessary, try another socket that you know is working.

9.2. I'm not happy with the result of the cut


The blade block (1) is dirty and/or is not running smoothly. Clean and oil the blade block
(1) as described in the 'Cleaning' section.
16 - English