7 Install channels
The fi rst time you setup your TV, you will be
prompted to select an appropriate menu
language and to perform automatic installation
of all TV and digital radio channels (if available).
This chapter provides instructions on how to
reinstall channels as well as other useful channel
installation features.
Note
•
Re-installing channels modifi es the
Automatically install channels
This section describes how to search and store
channels automatically. Instructions are for both
digital and analogue channels.
Step 1 Select your menu language
Note
•
Skip to Step 3 if your language settings are correct.
1
Press MENU on the remote control
and select [TV menu] > [Installation] >
[Languages] .
Installation
Languages
Country
Time zone
Channel install...
Preferences
Connections
...
[All channels] list.
Languages
Menu language
Preferred audio
Preferred subtitles
Hearing impaired
2
to enter the [Languages] menu.
Press
3
Press
or
to select your language.
4
Press OK to confi rm.
5
to return to the [Installation]
Press
menu.
In addition to menu language, you can
confi gure the following language settings
via the [Languages] menu (digital channels
only):
•
[Preferred audio]
Select one of the available audio languages
as your preferred audio language (see
'Adjust sound settings' on page 23 ) .
[Preferred subtitles]
•
Select one of the available subtitle
languages (see 'Select a subtitle language
on digital TV channels' on page 33 ) .
[Hearing impaired]
•
If available, select [On] to display the
hearing impaired version of your preferred
audio or subtitle language.
Step 2 Select your country
Select the country where you are located. The
TV installs and arranges channels according to
your country.
Note
•
Skip to Step 3 if your country settings are correct.
1
In the [Installation] menu, press
select [Country] .
2
Press
to enter the list.
3
Press
or
to select your country.
4
Press
to return to the [Installation]
menu.
Step 3 Select your time zone
This option is only available for countries with
different time zones. Skip this step if it is not
applicable.
to
EN
37