Program Sort; Manual Store; Other Settings In The Install Menu - Philips 26PF8946/12 User Manual

Program sort

H
& Press key
.The TV Menu is displayed on
the screen.
TV Menu
Picture
Sound
Language Æ
Features
Country Æ
Install
Mode
Auto Store Æ
Manual Store Æ
Sort Æ •
Name Æ

Manual store

This menu is used to store the programmes
one at a time.
H
& Press the
key.
é With the cursor, select the Install menu then
Manual store:
TV Menu
Manual Store
Picture
Sound
Features
Install
Mode
Program No.
Fine Tune
" System: select
Europe
or (BG standard), Eastern
Western Europe
Europe (DK standard), United Kingdom (I
standard) or France (LL' standard).

Other settings in the Install menu

H
& Press the
key and select the Install menu:
é Language: to change the display language for
the menus.
" Country: to select your country (GB for
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your country
does not appear in the list, select ". . . "
' Auto Store: to start automatic search for all
programmes available in your region. If the
transmitter or cable network sends the
automatic sort signal, the programmes will be
numbered correctly. If this is not the case, you
need to use the Sort menu to renumber the
programmes (see p. 4).
Some transmitters or cable networks broadcast
Install
0
•
1
•
2
•
3
•
4
5
•
System Europe
Search
Store
(automatic detection*)
é With the cursor, select the Install menu
followed by the Sort menu.
" Select the programme you want to move using
îÏ
the keys and press
îÏ
' Then use the
number and validate with
( Repeat steps " and ' for each program you
wish to renumber.
§ To quit the menus, press
* Except for France (LL' standard), you must select
choice France.
¬
' Search: press
.The search starts. Once a
programme is found, the scanning stops and its
name is displayed (when available). Go to the
next step. If you know the frequency of the
required programme, this can be entered
0
directly using the
If no picture is found, consult the possible solutions (p. 12).
( Program No.: enter the required number
Ȭ 0
with the or
§ Fine Tune: if the reception is not satisfactory,
Ȭ
adjust using the
¬
è Store: press
.The program is stored.
! Repeat steps ' to ! for each programme to
store.
ç To quit the menus, press
their own sort parameters (region, language, etc.). In
this case, indicate your choice using the
keys and validate with
H
search, press . If no picture is found, consult the
possible solutions (p. 12).
( Name: If required, you can give a name to the
programmes and external connectors. Use the
Ȭ
keys to move around the name display
area (5 characters) and the
select the characters.When the name has been
È
entered, use the
stored.
Note: on installation, the programs are named
automatically when an identification signal is sent.
§ To quit the menus, press
¬
.
keys to select the new
È
.
d
.
9
to keys.
9
to keys.
keys.
d
.
îÏ
¬
.To quit or interrupt the
îÏ
keys to
key to exit.The name is
d
.
5