Security Matters - Canmac DMA EC3R Instruction Manual

DONER MACHINE
In case of any doubt or malfunction, turn off and unplug the device, and immediately contact
authorised reseller. Do not operate the device before required maintenance is carried out.
Third party intervention may cause damage and personal injuries, please contact authorised
tech service.
Manufacturer takes no responsibility for damages caused by faulty power connections.
All maintenance work should be held by the authorised tech service. Otherwise, warranty
will no longer be in force.
If the power connection is made by authorised service or certified expert, and the device
used in accordance with the manual, (6) months material warranty will be effective.
5. RELOCATION AND PLACING
If any hazard (impact, falling etc.) occurs during transportation, contact authorised
service for an electric leakage test before operating the device.
If any transportation is required, please carry the device in its original packaging
and carefully read the transportation signs on the package.
If the original packaging cannot be found, it is strictly recommended that the mobile parts
(Robox color glass, skewer, skewer knob, upper mobile body and oil drawer) are tightly
stretch filmed to avoid any possible damages.
Take required precautions against impacts that may damage Heater On-Off Switch (3),
Engine On-Off Switch (6), Front Protective Glass (4), and Output Cable Connectors.
Do not place heavy materials on top of the device.
Keep the device right up during relocation.
If the device is to be stored without usage, keep it away from moisture and dust,
and in its original package.
ELECTRIC

4. SECURITY MATTERS

9