Installing - Canmac DMA EC3R Instruction Manual

ELECTRIC
DONER MACHINE

6. INSTALLING

Installing of the device should only be held by authorised personnel or certified expert.
The environment in which the device will be installed and operated should be well-ventilated.
Metal surfaces – especially those contacting the food – of the device should be cleansed
before operating.
Use proper cleaning appliance for food safety.
The device should be installed in an environment with minimum 1 m3 air for 300 kcal/h
– if the environment is enclosed, provide a hood or proper ventilation.
Use the device with a proper electric connection that conforms with the given details.
Place the device on top of a plain, strong marble or stainless platform with 70 cm height.
Make sure that the side on-off switches are off before operating.
Place the device with minimum 150 mm distance from the wall.
Power network cables should be tested by certified experts.
IMPORTANT: Maximum heat power of the device during operation is 1.750 kW.
Faulty parts should only be changed with original spare parts produced
by the manufacturer itself.
Manufacturer strictly recommends the usage of original parts for secure operating of the device.
Manufacturer takes no responsibility for damages caused by faulty installing or connection.
10