Intended Use And Operating - Canmac DMA EC3R Instruction Manual

7. INTENDED USE AND OPERATING

Electric connections should be checked before operating. To let the power in,
rotate the knob arrow direction (to the left).
First turn the knob till it reaches 1 and let the power in.
Power inlet can be observed through observation port. You can adjust the heating
by turning the knob arrow direction to the points of 2, 3, and Max.
ELECTRIC ENGINE PLUG
Make sure that the plug socket, in which the electric
engine to be plugged, has earth line.
ELECTRIC ENGINE ON-OFF SWITCH
After plugging in, mobilize the engine either clockwise or
counter-clockwise through the on-off switch on front of the device.
SLEDGE
To stabilise or mobilise the upper-body, use the side
sledge-stabiliser (6) and adjust the position.
12
ELECTRIC
DONER MACHINE