2492.3 EN
24-02-2006
Step 3: Connecting and configuring your TV
Configuration A
Make sure DHCP/Auto IP (automatic network
addressing) is enabled on your router and your
PCs.
On most of the recently purchased PCs and
routers, automatic network addressing is
already enabled.
You can check this on your PC with the Network
Utility on the supplied
Connecting your TV
&
Push one end of an Ethernet cable (
cable
) into the
NETWORK
bottom of the TV.
Straight cable
é
Push the other end into a free Ethernet
connector on your router.
"
Go to 'Viewing multimedia content' on p. 6 to
test your connection.
15:55
Pagina 5
CD.
a straight
connector at the
Configuration B
Make sure DHCP/Auto IP (automatic network
addressing) is enabled on your PC.
On most of the recently purchased PCs,
automatic network addressing is already
enabled.
You can check this on your PC with the Network
Utility on the supplied
Connecting your TV
&
Push one end of a crossed Ethernet cable (
) into the
crossed cable
at the bottom of the TV.
Warning !
Crossed cable
é
Push the other end into the free network
connector on your PC.
"
Go to 'Viewing multimedia content' on p. 6 to
test your connection.
CD.
a
connector
NETWORK
5