Connecting To Your Tv Antenna, Pc, Dvd/Vcr Etc; Accessory Pack; Setting Up And Connecting Your Tv - Philips 15MF150V Manual

Connecting to Your TV Antenna, PC, DVD/VCR etc.

Accessory Pack

Unpack all the parts.
Power cable
Wall mount kit

Setting up and connecting your TV

Ensure that the power to the TV is switched off before the installation.
A) Connecting to PC computer
1. Make sure the external speaker power cable is plugged into the DC 12V OUT connector on the back of the
TV.
2. Connect the power cord to the AC IN power connector on the back of the TV.
3. Connect the 15-pin D-SUB of the video signal cable to the VGA connector on the back of the TV.
Note: If you use an Apple Macintosh
monitor signal cable.
TM
, you need to connect the special Mac adapter to one end of the
16
Remote control & batteries
Audio Chin cable