How To Initialize The Lcd Tv - Philips 29PFL4508/F4 Service Manual

29” lcd tv

Hide thumbs Also See for 29PFL4508/F4:

Table of Contents

The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to

select a language and program channels after the set has been initialized.

To put the program back at the factory-default, initialize the LCD TV using the following procedure.

1. Turn the power on.

2. Enter the service mode. (Refer to page 5-1.)

- To cancel the service mode, press [EXIT] button

on the remote control unit.

3. Select "Fac Reset" and [OK] button on the remote

control unit.

The TV set will go off and turn back on

automatically when initialization completes.

HOW TO INITIALIZE THE LCD TV

6-1

PL13.21_INT

Table of Contents