Table of Contents
Advertisement
603.95.321_Ford AUDIO_KA_GB_1ed
?
To call a contact in your
phonebook using manual
interaction, proceed as follows:
ß
Press
/MAIN to activate the
Main Menu.
Select PHONEBOOK and then
press SRC/OK or
Press N or Oto select the
alphabetical grouping which your
contact's name belongs to, press
SRC/OK or
select the required contact.
If the contact has only one phone
number, press SRC/OK or
ß
/MAIN to start the call.
If the contact has multiple phone
numbers, press SRC/OK or
ß
/MAIN to view the different
phone numbers and then select
the required one by N or O and
press SRC/OK or
start the call.
To end the phone call, press
ß
/MAIN for longer than
1 second.
20
3/28/11
9:49 AM
Page 20
}
Or, using voice interaction:
Assume you would like to call the
contact "John" in your mobile
phone phonebook.
Press
John" or "Call John (on/at)
ß
/MAIN.
Mobile" (in the previous
statement, the keyword
"Mobile" represents the type of
phone number you would like to
ß
/MAIN and then
call. The phone number type can
either be "(at) Home", "(at)
Work", or "(on/at) Other").
If the name is recognized, the
system will display the recognized
contact's information (John, in the
example) on the display screen.
If John has just one phone
number, the system will ask if you
ß
/MAIN to
would like to call John. To start
the call say "Yes", otherwise say
"No".
If John has several phone
numbers, the system will ask
which phone number you would
like to call (e.g.: "Call John (at)
Work or (at) Home?"). Answer
with the type of required phone
number (e.g.: "(at) Home").
}
and pronounce "Call
If John has several phone numbers
but the "location" (i.e.: the type
of phone number like work,
home, etc.) is missing, the system
will display the selected contact
and a list of related phone
numbers.
To call the displayed phone
number, pronounce "Call".
If the contact is correct but the
phone number is wrong, you can
surf the phone number list
manually by pressing N or O.
When you find the required
ß
number, press
/MAIN or
SRC/OK to start the call.
To end the phone call, press
ß
/MAIN for longer than
1 second.
Suggestion
When you call a contact with multiple
phone numbers, say the number type
you want to call in the voice command
("(at) Home", "(at) Work", "(on/at)
Mobile") This will shorten the amount
of steps required to make the phone
call.
Advertisement
Table of Contents
