Table of Contents
Advertisement
Use
Settings
6 / 8
Connect the power supply to the net socket with the proper volt-
age by using the including connection cable.
The power supply starts with switched off output voltage, in the
display will be shown in the highest line "POWER OFF".
In the display will be shown the actually set output voltage, the
maximum output current, the actual watt consumption and the
internal temperature of the power supply.
The output voltage can be set in this display by pushing the
arrow buttons.
Power OFF
25. 0
60. 0
0. 0 W
30. 2 °C
CAUTION
!
Before you switch the output voltage on:
a too high voltage can lead to fire and can destroy the connected bat-
tery charger. Inform yourself about the maximum voltage needed by
the battery charger that is connected to the power supply. Set the
voltage previously properly through the arrow buttons.
The output voltage is switched on through the Start/Enter but-
ton. In the highest line of the display will appear "POWER ON".
To acceed to the settings menu push and hold the STOP/SET
button for approx. 2 se.
Program Set Up
Max. Current
Fan On Temp.
Shut Down Temp
-->
80 °C
Buzzer
Back Light
Temp. Unit
Through the arrow buttons you can select the menu points. The
selected menu point changes to yellow.
If you push the Start/Enter button the menu point blinks, now
you can change the value though the arrow buttons.
V
A
Advertisement
Table of Contents
