Index Introduction ................. 3 Service Centre ..............3 Declaration of conformity ..........3 Intended use ............... 4 Package content ..............4 Technical Data ..............4 Symbols explication ............5 Safety notes ................ 5 Use ..................6 Settings................6 Warning messages ............. 7 Notes on environmental protection ........
1500 . This power supply is extremely versatile. Read this manual carefully to achieve the best results with your Polaron SMPS 1500 and first of all to safely control your models. If you experience any trouble during operation, take the instruc- tions to help or ask your dealer or Graupner Service Centre.
The Polaron SMPS 1500 is only suitable for being used as power supply for RC model battery chargers. Other uses are not allowed. For any improper use no warranty or liability is accepted.
Symbols explication Always observe the information indicated by this warning sign. Particularly those which are additionally marked with the CAU- TION or WARNING. The signal word WARNING indicates the poten- tial for serious injury, the signal word CAUTION indicates possibil- ity of lighter injuries.
Connect the power supply to the net socket with the proper volt- age by using the including connection cable. The power supply starts with switched off output voltage, in the display will be shown in the highest line "POWER OFF". In the display will be shown the actually set output voltage, the maximum output current, the actual watt consumption and the internal temperature of the power supply.
You have the following setting possibilities in the single menu points: Max. Current Maximum current given by the power supply, 1 - 60 A Fan on Temp. Switch-on temperature of the cooling fans in the device, 30 - 50°C The fan power will be regulated depending on the load. Shut Down Temp.
The cur- rent version can be found on the Internet at www.graupner.de the relevant product page. In addition, the company Graupner has no responsibility or liability for any errors or inaccuracies that may appear in construction or operation manuals.