Introduction
This manual describes the capabilities and operation of the Welch Allyn
4400 (device). The information, including the illustrations, pertains to a device configured
with noninvasive blood pressure (NIBP), body temperature, pulse oximetry (SpO2), and
pulse rate. If your device configuration lacks any of these options, some information in
this manual might not apply.
Before using the device, read the sections of the manual that pertain to your use of the
device.
Intended use
The Welch Allyn
medically qualified personnel for operator initiated spot-check/single measurement of
noninvasive blood pressure, pulse rate, noninvasive functional oxygen saturation of
arteriolar hemoglobin (SpO2), and body temperature in oral, rectal and axillary modes of
adult and pediatric patients down to 29 days of age.
The intended use locations for patients to be measured are physician's offices, general
hospital and alternate care environments.
Contraindications
This device is not intended to be used:
•
for use on neonates.
•
for unattended monitoring.
•
for patient transport.
•
for use in the home healthcare environment.
For contraindications of SpO2 sensors, consult the sensor manufacturer's directions for
use.
®
Spot Vital Signs 4400 (device) is intended to be used by clinicians and
1
®
Spot Vital Signs