Using the LOCKS menu
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME
TIMER, PANEL LOCK, and NEW PASSWORD functions.
Selecting a password
You can use these functions after entering the correct password.
To select your password and access the LOCKS menu:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press L or M to display the password entering mode.
L O C K S
N E W P A S S W O R D
- - - -
S E L E C T : [ 0 - 9 ]
E N T E R
4. Use the Channel Number buttons (0-9) to enter your password.
If you are accessing the LOCKS menu for the first time, select a
four-digit number to be your password. Press ENTER.
L O C K S
N E W P A S S W O R D
S E L E C T : [ 0 - 9 ]
E N T E R
5. Enter the password again to confirm it, and then press ENTER.
The LOCKS menu appears.
If the wrong password is entered, "ERROR" blinks about 4
seconds.
L O C K S
C O N F I R M P A S S W O R D
S E L E C T : [ 0 - 9 ]
E N T E R
6. You may now set up the LOCKS menu. See "Locking channels"
(page 26), "Locking the video inputs" (page 26), "Setting the
GameTimer
TM
" (page 27) or "Using the panel lock feature" (page
27).
To change your password:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press L or M to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password.
Press ENTER. The LOCKS menu appears.
5. Press L or M to highlight NEW PASSWORD and press
display the NEW PASSWORD menu.
6. Use the Channel Number buttons (0-9) to enter a new code. Press
ENTER.
7. Enter the password again to confirm it, and then press ENTER.
8. Press EXIT to return to normal viewing.
J3U70221A(E)P25-28
or
to highlight the LOCKS menu.
: S E T
E X I T
: E N D
: S E T
E X I T
: E N D
: S E T
E X I T
: E N D
or
to display the LOCKS menu.
25
Note:
The password you programmed is also used in
the LOCKS menu; see pages 26-27.
INPUT DISPLAY
CT-885
to
Note:
If you forget your password, press DISPLAY
four times within five seconds while the TV is
in password entering mode. This allows you
to reset your password.
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
25
05/08/2005, 10:14 AM
Display
Channel
Numbers
TV
Menu/
Enter
Exit