Using Regza-Link; Controlling Regza-Link Playback Devices; Regza-Link Input Source Selection; Regza-Link Player Control - Toshiba 46WX800 Owner's Manual

Using REGZA-LINK

This feature uses CEC technology and allows you to
control Toshiba REGZA-LINK
from the TV remote control via HDMI connection.
When Enable REGZA-LINK in the REGZA-LINK
Setup menu is set to On, the following REGZA-LINK
functions are enabled.
Controlling REGZA-LINK
devices
With your TV's remote control, you can control the
connected REGZA-LINK playback device (DVD player,
etc.) you are watching.
Available remote control key functions:
Before using these key functions, set the MODE
SELECT switch on the remote control to TV.
Button Description
S
Begins playback.
D
Stops playback.
Pauses the picture during play or record
A
mode.
G
Skips forward.
F
Skips backward.
J
Fast-forwards.
H
Rewinds/reverses.
B b C c
Navigates contents menu, etc.
Enters contents menu, etc.
O K
Returns to the previous menu.
O
Closes the menu.
RED,
GREEN,
Controls various operations
YELLOW,
BLUE
Note: These functions depend on the connected devices.
Chapter 6: Basic features
®
®
compatible devices
®
® playback
®
REGZA-LINK Player Control menu functions:
1
Press to open the Quick menu.
2
Select REGZA-LINK Player Control. Press
3
Press B or b to select the item you want to control
and press .
OK
Item Description
Power Turns the selected device on and off.
Root Menu Accesses the selected device's top menu.
Contents Accesses the contents list when you press
Menu .
OK
Setup
Accesses the DVD player's setup menu.
Menu
Accesses the DVD's top menu during
Top Menu
playback.
DVD
Accesses the DVD's menu during playback.
Menu
Note:
• These functions depend on the connected devices.
• The REGZA-LINK Player Control item is not available
under these conditions:
- A non-HDMI input is selected.
- The Enable REGZA-LINK item is set to Off.
- The connected REGZA-LINK device is not a playback
or recording device.
REGZA-LINK ® input source selection
If a REGZA-LINK ® device with HDMI switching
capability (e.g. an amplifier) is connected to the HDMI
input, you can select another REGZA-LINK
that is connected to the master HDMI device.
Use + on the remote control or the control panel (-
p. 38).
.
OK
® device
43