Toshiba 46WX800 Owner's Manual page 72

Media Renderer
Y > PREFERENCES > Media Renderer Setup
1
> .
OK
2
Press B or b to highlight Media Renderer. Press C
or c to select On or Off.
Device Name Setup
The device name as a DMR can be changed. The set
device name can be confirmed from the DMC.
Y > PREFERENCES > Media Renderer Setup
1
> .
OK
2
Press B or b to select Device Name Setup. Press
.
OK
3
Select the Device Name field. Press
Software Keyboard screen appears.
4
Input the Device Name by using the Software
Keyboard (- p. 65). To save your setting, press the
BLUE button.
Note: The Device Name can be up to 127 characters
long.
5
Select Done. Press .
O K
Web Password Setup
This setup sets a necessary password for the DMC's
accessing a built-in Web page of a DMR.
Y > PREFERENCES > Media Renderer Setup
1
> .
OK
2
Press B or b to select Web Password Setup. Press
.
OK
3
Select the Password field. Press
Keyboard screen appears.
4
Change the password by using the Software
Keyboard (- p. 65). Press the BLUE button.
Note:
• The Web Password can be up to 15 characters long.
• Only the password can be changed. User ID cannot
be changed.
5
Select Done. Press .
O K
Note:
• Some DMC can view or modify the device name of the
DMR.
• Depending on the TV's state, the device name may not
be set from Web page.
• Confirm the DMCs instruction manual for the way of
accessing Web pages.
72
Chapter 8: Advanced features
Media Controller Setup
You can limit which DMC can control this TV.
If Access Control is enabled, only those DMCs with a
check will be allowed to control the TV.
1
2
3
4
5
. The
OK
6
Note:
• You can select up to 8 DMC devices.
• If you would not like to limit the DMCs for this TV, set
Access Control to Off.
• Devices other than DMC may be displayed in the list.
Confirm the MAC address of DMC and set it.
Maximum Volume Setup
This feature allows you to set the maximum volume of
the TV when it receives volume operation commands
from a DMC.
1
2
. The Software
O K
Note:
• The TV's remote control can set volume regardless of the
value of Maximum Volume Setup.
• When DMR playback is ended, the TV volume will return
to the value in effect when DMR playback was started.
Y > PREFERENCES > Media Renderer Setup
> .
OK
Press B or b to select Media Controller Setup.
Press .
OK
Press B or b to highlight Access Control. Press C
or c to select On.
Press B or b to select Select Media Controller.
Press .
OK
Press B or b to select the item you want to accept.
Press .
OK
The box is selected. To clear the selection, press
Press c to select Done. Press
Y > PREFERENCES > Media Renderer Setup
> .
OK
Press B or b to highlight Maximum Volume Setup.
Press C or c to adjust to the desired volume.
.
OK
.
OK