Bosch MIC IP fusion 9000i Operation Manual page 14

14 en | General
2.
3.
Title region
Select On to set or to edit the position of the title region on the OSD.
The fields Position (XY) and (0...255) appear.
1.
2.
Select Off to hide the region from view.
Telemetry region
Select On to set or to edit the position of the telemetry information (azimuth and elevation
(pan/tilt position)) and the zoom factor on the OSD. Refer to the section "PTZ Settings, page
31" to set the pan and tilt limits.
The fields Position (XY) and (0...255) appear.
1.
2.
Select Off to hide the region from view.
Feedback region
Select On to set or to edit the position of system feedback messages (including message for
camera settings such as focus, iris, and zoom level) on the OSD. Refer to the section "Lens
Settings" to configure these settings.
The fields Position (XY) and (0...255) appear.
1.
2.
Select Off to hide the region from view.
Transparent background
Check this box to make transparent the stamp background on the image.
Stamping size
Select the desired font size of the overlays on the OSD: Normal or Large.
Text color
Select the color for the alarm message to be displayed in.
Background color
Select the background color for the alarm message to be displayed in.
If you have enabled the Transparent background option, the background color is not
displayed in the OSD.
Video authentication
Select from the Video authentication drop-down box a method for verifying the integrity of
the video.
If you select Watermarking, all images are marked with an icon. The icon indicates if the
sequence (live or saved) has been manipulated.
If you want to add a digital signature to the transmitted video images to ensure their integrity,
select one of the cryptographic algorithms for this signature.
Signature interval [s]
For certain Video authentication modes, enter the interval (in seconds) between insertions of
the digital signature.
2019-11 | 1.2 |
Specify the exact position (Position (XY)).
In the Position (XY) fields, enter the values for the desired position.
In the field Position (XY), specify the exact position. (The default is 10.)
In the field (0...255), enter the position range. (The default is 176).
In the field Position (XY), specify the exact position. (The default is 10.)
In the field (0...255), enter the position range. (The default is 176).
In the field Position (XY), specify the exact position. (The default is 10.)
In the field (0...255), enter the position range. (The default is 176).
Operation Manual
MIC IP fusion 9000i
Bosch Security Systems