Ers 5900 Series Power Options - Avaya 5900 Series Installing

Installation preparation
2. Plug the male end of the AC power cord into a suitable AC power outlet.
Caution:
Ensure you only use an appropriately rated AC power cord. Do not use an extension
cord.
Warning:
The only way to turn off the switch is to disconnect the power. Always connect the AC power
cord in a location that can be reached quickly and safely in case of an emergency.

ERS 5900 Series power options

The ERS 5900 Series uses power supply modules. All ERS 5900 Series power supply modules
have an internal fuse for protection. The ERS 5900 Series power contain fans (either back to front or
front to back) for cooling purposes.
Two power supply modules can operate in parallel for redundancy.
All ERS 5900 Series power supply modules are hot-swappable and hot-pluggable.
Power specifications
This section provides the following specifications for Ethernet Routing Switch 5900 Series:
• AC power specifications
• Typical power consumption
• PoE+ specifications
The following table describes the AC power specifications.
Table 5: AC power specifications
Model
ERS 5952GTS-PWR+
February 2016
on page 28
on page 30
on page 30
Power supply Power supply
configuration
Rated
Dual supply 1000
(1000 W/PSU) W/PSU
Single supply
(1000 W)
Installing Avaya ERS 5900 Series
Comments on this document? infodev@avaya.com
Input power
(margined by
10%)
Line Watts Amps
voltage (Total)
100–120 1665 14.58
VAC
932.6 8.06
Power consumption
(Thermal rating)
Watts BTUs/hr
221 754.1
154.6 527.4
Table continues...
28