Troubleshooting - Blaupunkt BARCELONA 230 Operating And Installation Instructions

Table of Contents

Advertisement

SYMPTOM
No power
Disc cannot be loaded.
Disc cannot be read.
No sound
The operation keys
do not work.
Sound skips.
The radio does not
work,the radio station
automatic selection
does not work.
07_EA_BarcelonaBrisbane_World.indd 37
CAUSE
The car ignition is not on.
The fuse is blown.
Presence of disc inside
the player
Inserting the disc in
upside down.
Compact disc is extremely
dirty or defective.
Temperature inside the car
is too high.
Volume is in minimum.
Wiring is not properly
connected.
The built-in microcomputer
is not operating properly
due to noise.
Front panel is not properly
fix into its place.
The installation angle is
more than 30 degrees.
The disc is extremely dirty
or defective.
The antenna cable is not
connected the signals are
too weak.
SOLUTION
If the power supply is properly connected to
the car accessory switch the ignition key
to "acc".
Replace the fuse.
Remove the disc in the player then put a
new upward.
Insert the compact disc with the label facing
upward.
Clean the disc or try to play a new one.
Cool off until the ambient temperature
returns to normal.
Adjust volume to a desired level.
Check wiring connection.
Press the power button for about 10
seconds to reset the unit.
Adjust the installation angle to less than
30 degrees.
Clean the compact disc/try to play a new one.
Insert the antenna cable firmly select a
station manually.
37
20.06.14 09:52

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brisbane 230

Table of Contents