Finishing The Outdoor Unit Installation; To Close The Outdoor Unit; To Install The Discharge Grille - Daikin Altherma 3 H HT Series Installation Manual

6 Finishing the outdoor unit installation

6 Finishing the outdoor unit
installation
6.1

To close the outdoor unit

NOTICE
When closing the outdoor unit cover, make sure that the
tightening torque does NOT exceed 4.1 N•m.
3 2
6.2

To install the discharge grille

Install the lower part of the discharge grille
1 Insert the hooks.
2 Insert the ball studs.
2
1
3 Fix the 2 lower screws.
3
2×
Installation manual
14
4 1
3 2
3×
4 1
Install the upper part of the discharge grille
NOTICE
Vibrations. Make sure the upper part of the discharge
grille is attached seamlessly to the lower part to prevent
vibrations.
4 Align and attach the left side.
5 Align and attach the middle part.
6 Align and attach the right side.
4
7 Insert the hooks.
8 Insert the ball studs.
9 Fix the 6 remaining screws.
9
6×
6
5
8
7
EPRA14~18DAV3+W1
Daikin Altherma 3 H HT
4P586100-1B – 2019.09