Kohler REVE K-20766T-S Installation Instructions Manual page 19

3. Drill four holes with diameter of 10mm and depth of 80mm
with churn drilling as shown, and fill in the holes with bulge
screw and tighten the screw.
3.
4. Tighten the hexagonal long screw with medium Allen key
as shown in illustration A.
Tighten the screw of adjustable brackets with medium
Allen key as shown in illustration B, and tighten the long
screw with spanner.
NOTE: Ensure the tank to remain level.
4. A
B
Connect with overflow pipe on the side when installing
K-20006K-PNE/K-20008K-PNE.
K-20006K-PNE/K-20008K-PNE
1288818-T01-B
10mm 80mm
Bulge Screw Cap/Bolt
-7-
Bulge Screw
Gasket
/
Hexagonal Screw
Loosen
Level
A
Medinm Allen Key
Spanner
Adjustable Bracket
Screw
B
Overflow Pipe
Tighten