Toshiba GD-1210 Operator's Manual page 75

When originals are being scanned using the Reversing Automatic Document Feeder
(optional):
1
Press the [STOP] button while the
multiple originals are being scanned.
Scanning (storing into memory) is
paused.
2
To cancel the job, press the [JOB CANCEL] button while scanning
is paused.
To resume scanning, press the [START] button on the control panel.
When the [JOB FINISH] button is pressed, the scanned data of the original(s) start to
be transmitted.
To change the setting of the scanning conditions, press the [OPTION] button.
( P.37 "Setting the scanning conditions for each page")
If you do nothing for about 45 seconds after the pause of the transmission, the trans-
mission that is currently being scanned is cleared from the memory.
3
Press the [YES] button.
Canceling Transmissions 73