Other Functions (Vcr); Duplicating A Video Tape - Toshiba MW14F52 Owner's Manual

Other functions (VCR)

Duplicating a video tape

If you connect the unit to another VCR or Camcorder, you can
duplicate a previously recorded tape. Make all connections before
turning on the power.
Duplicating a video tape
Preparation:
• Press TV/VCR to select the TV/VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
Load a previously recorded tape into the playback
•
VCR or Camcorder.
1
Press SPEED to select the desired tape speed
SP or SLP.
It is recommended to set the Speed to
the SP mode on the recording VCR
for best results.
Press INPUT to select AUDIO/VIDEO input
2
position.
3 Press REC.
4
Press PLAY on the playback VCR or camcorder.
5 Press STOP when you finish duplicating.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materials,
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and/or
criminal liability.
42
5W60101A [E]p42-43
LINE
42
Connection with second video recorder
Playback VCR
To VIDEO OUT
Audio/Video cable (not supplied)
Recording VCR
To VIDEO IN
To AUDIO (R) IN
To AUDIO (L) IN
Connection with Camcorder
Playback Camcorder
Recording VCR
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Audio/Video cable (not supplied)
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's
instructions. A typical camcorder dubbing hookup is
shown above.
5/4/06, 1:04 PM
TV/VCR
INPUT
STOP
REC
SPEED
To AUDIO (R) OUT
To AUDIO (L) OUT
To AV Jack