Error Codes On The Display Window - Toshiba RD-XS24SB Owner's Manual

Others

Error codes on the display window

The recorder display shows error codes in addition to the message screen.
Main examples are as follows.
The "**" in the "ERR **" message indicates an error code. To delete this display, press the DISPLAY
button on the remote control.
Error code Description
ERR01 Error detected in the physical format.
ERR10 Exceeded volume detected.
ERR11 Exceeded number of titles detected.
ERR12 Exceeded number of chapters detected.
ERR13 Copy protection information detected.
ERR14 DVD disc access error detected.
ERR15 Other errors detected.
ERR16 HDD access error detected.
ERR17 Wide image recorded at 1.4 Mbps detected.
ERR18 Different aspects detected in the same part.
ERR19 Different resolutions detected in the same part.
ERR1A Different sound quality modes detected in the same
part.
ERR1B Invalid control information detected.
ERR1C Parts created in other recorder.
ERR1D Parts created with "DVD compatible mode = Off"
detected.
ERR1E Invalid parts detected.
ERR1F Unexpected error detected.
ERR2E Menu encode error detected.
ERR2F Overflow of the menu size detected.
ERR30 Exceeded maximum number of menus detected.
ERR31 Recovery writing executed from compatibiliy of drive
and disc.
ERR32 Incompatibility of disc format detected.
ERR33 Disc protected.
ERR34 Disc protected or system control data error detected.
ERR35 Exceeded volume in disc budget calculation detected.
ERR36 Recording failed. (Title not saved.)
ERR31 Recording failed. (Title saved.)
ERR38 Writing failed. (Title not reserved)
ERR39 Writing failed. (Title saved.)
ERR3A Unexpected error detected.
ER7000 Possible error detected in the HDD.
Note
• If you find an error code other than listed above, consult your nearest TOSHIBA dealer.
RD-XS24SB_Ope_E_p127-137 133
• When creating a DVD-Video
• When creating a DVD-Video
• When recording on DVD-R/RW
• When dubbing to DVD-R/RW
• When recording on DVD-R/RW
9/1/05, 12:00 AM
133