Toshiba RD-XS24SB Owner's Manual page 105

To delete a captured image
Press / / /
press QUICK MENU. Press
Menu" then press ENTER. Follow the message to
operate.
To delete all captured images, select "Delete all
Menus".
Cancelling selection of an item
1) Press / / /
QUICK MENU.
The Quick Menu appears.
e.g.
E D I T
DVD-Video Create (Selected Items)
MENU
Quick Menu
HDD :
11
Cancel Selected Title
Title Information
Crear All Selected Items
Exit
001
Capacity
2) Press / to select "Cancel Selected Title" (or
"Clear All Selected Items" for cancelling
selection of all items at a time).
3) Press ENTER.
The selected item disappears.
RD-XS24SB_Ope_E_p102-105
to select an image to delete then
/ to select "Delete
to select an item then press
HDD (VR)
Source: (VR)Title
Original
Media:
DVD-R (V)
002 003
Next
105
If a message appears while selecting a part
You may receive a message, such as "Selection of
Writing Test in the next option setting is recommended
to check whether Aspect Ratio coexists". If a copy-
prohibited content is included, or if the aspect ratio is
changed meanwhile, cancel the selection. If you are
not sure, select "Writing Test" ("Parts Test" or "All
Test").
Note
• Depending on selection or condition of items, copying may
result in failure. If a message appears, be sure to, prior to
step 8, press the QUICK MENU button. Then press the
/ buttons to select "Cancel selected title", and press
the ENTER button. If you do not do this and continue the
copying process, an error may occur and the disc will be
rendered useless.
Playing a created DVD-Video
You can play the DVD-R/RW (Video mode) in the same
manner as you would play a DVD video disc.
See page 56.
If you want to correct the contents of a DVD-RW
(Video mode) after the DVD-Video creation
procedure
Cancel the finalization of the DVD-RW (Video mode)
( page 93).
It is possible only on DVD-RW (Video mode) recorded
on this recorder.
After cancelling, you can delete titles. However, you
cannot re-use the whole disc, since only the last title
can restore the disc space.
If you want to delete all contents of a DVD-RW
(Video mode) after the DVD-Video creation
procedure
Load the DVD-RW into the recorder and initialize it,
then execute the procedure of DVD-Video creation
( page 98).
8/31/05, 11:58 PM
105