Connecting To An Amplifier Equipped With A Dolby Digital Decoder; Connecting To An Amplifier Equipped With Dolby Surround Pro Logic - Toshiba SD-K710 Owner's Manual

Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the
latest movies, and is now available to reproduce this realistic effect in the home.
You can enjoy motion picture and live concert DVD video discs with this dynamic
realistic sound by connecting the DVD player to a 6 channel amplifier equipped
with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby
Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the
same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well
as from titles with the Dolby Surround mark.
Amplifier equipped with a
Dolby Digital decoder
To OPTICAL
type digital
audio input

Connecting to an amplifier equipped with Dolby Surround Pro Logic

Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by
connecting an amplifier and speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an
amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's
owner's manual and set the amplifier so you can enjoy Dolby Surround Pro
Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with
*
Dolby Surround Pro Logic
To COAXIAL
type digital
Connect either.
audio input
75 coaxial cable
Optical digital cable
To audio input
ANALOG AUDIO OUT
Audio cable
Manufactured under license from Dolby
Laboratories. "Dolby", "Pro Logic" and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential
unpublished works. Copyright 1992-1997
Dolby Laboratories. All rights reserved.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
On-screen display
VIDEO OUT AUDIO OUT
VIDEO Y P P
B R
"Digital Output"
R L COAXIAL OPTICAL
S
ANALOG BITSTREAM/PCM
Recording system
• Make the following setting.
On-screen display
"Digital Output"
Be sure to set "Digital Output" to
"Bitstream" or "PCM" when you
enjoy sounds of Dolby Surround
Pro Logic using this connection.
* Connect one or two rear speakers.
The output sound from the rear speakers
VIDEO OUT AUDIO OUT
VIDEO Y P P
B R will be monaural even if you connect two
rear speakers.
R L COAXIAL OPTICAL
S
ANALOG BITSTREAM/PCM
Select: Page
56
"Bitstream"
59
42
D
Select: Page
"Bitstream"
56
or
59
"PCM"
21