Table of Contents
Advertisement
I
meeting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD video player
to optional audio equipment.
For connection to your TV, see "Connecting to a TV" |?6)|l7).
g . pront
For details of output sound, see [
33
).
n • Rear
Front speaker
Rear speaker
Sub woofer
0 : Center speaker
e=>
: Signal flow
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies,
and is now available to reproduce this realistic effect in the home. You can enjoy motion
picture and live concert DVD video discs with this dynamic realistic sound by connecting the
DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby
Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full
benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital
soundtracks, as well as from titles with the Dolby Surround mark.
♦
Amplifier equipped with a
Dolby Digital decoder
To OPTICAL J
type digital
\
audio input
j To COAXIAL
f type digital
audio input
Connect either, j
75 Q coaxial cable
Optical digital cable
Manufactured under license from Dolby
Laboratories. "Dolby", "Pro Logic" and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential
unpublished works. ©1992-1997 Dolby
^ Laboratories. All rights reserved.___
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
Setting
Select:
Page
"Audio Out Selecf
"Bitstream"
[35>
[39>
Recording system
□□d
[33>
Connecting to an amplifier equipped with 5.1 ch audio inputs
5.1 ch surround sound
The Dolby Digital decoder equipped with this DVD video player enables you to obtain the full
benefit of 5.1 channel Dolby Digital sound tracks when you connect the DVD video player to
a Dolby Digital ready amplifier equipped with 5.1 channel audio inputs.
Amplifier equipped with
5.1ch audio inputs
VS
Use DVD video discs encoded via
the Dolby Digital recording
system.
Make the following setting.
2 channel sound is output in the Dolby Pro
Logic format. To obtain the original 2
channel sound, select "Analog 2ch."
Connecting to an amplifier equipped with Dolby Pro Logic Surround
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers).
■ With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an amplifier
. Make the following setting.
equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set
---
the amplifier so you can enjoy Dolby Pro Logic Surround sound.
Setting
Select:
Page
-With an amplifier not equipped with Dolby Digital
"Audio Out Selecf
"Analog 2ch"
Connect the equipment as follows.
(39)
i-
r
.1 jr
.
--—
— Amplifier equipped with
I
I
*
A
[" Dolby Pro Logic Surround
[5 ">
Be sure to set
"Audio Out Select
1—
V
————-———j|
%_
jllftJ@o)
to "Analog 2ch" when you enjoy
I
t—i
B U To audio input
11
/-
I
I ——
enunrlc of PJnlhu Pro Loaie
Setting
Select:
"Audio Out Selecf
"Analog 2ch"
s®@ %
i
To 2CH AUDIO OUT
t
Be sure to set "Audio Out Select"
to "Analog 2ch" when you enjoy
sounds of Dolby Pro Logic
Surround using this connection.
Audio cable
18
* Connect one or two rear speakers.
The output sound from the rear speakers will be
monaural even if you connect two rear speakers.
Advertisement
Table of Contents
