Opening The Display; Turning On The Power - Toshiba P200 Series User Manual

Opening the display

The display panel can be rotated in a wide range of angles for optimal
viewing.
1. Slide the display latch on the front of the computer.
2. Lift the panel up and adjust it to the best viewing angle for you.
Use reasonable care when opening and closing the display panel. Opening
it vigorously or slamming it shut could damage the computer.

Turning on the power

This section describes how to turn on the power.
After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section
time
1. If a USB floppy disk drive is connected, make sure the drive is empty - if a
disk is in the drive, press the eject button to remove it.
2. Open the display panel.
3. Press the computer's power button and then release it.
User's Manual
in this chapter.
Opening the display
Turning on the power
Getting Started
Starting up for the first
3-3