Toshiba P200 Series User Manual page 170

6. In Catalyst Control Center window, setup your television or CRT and
Notebook displays.
* The availability of this feature is dependent on the model you purchased.
Displaying movies on a HDMI Monitor
This section describes how to set up your system to display movies a HDMI
monitor.
To connect a HDMI monitor, follow the steps below.
1. Turn the computer off.
2. Use a HDMI cable (not supplied) to connect the HDMI monitor to the
HDMI out port on your computer.
3. Turn the HDMI monitor on.
4. Turn the computer on.
If a HDMI monitor is connected to the computer, follow the steps below,
based on the configuration of your computer:
1. Click Start and All Programs.
2. Click Catalyst Control Center.
3. Select CCC.
4. In Catalyst Control Center window, select Display manager from left
select panel.
5. You can see a HDMI monitor that connected in the list (If not, you can
click Detect Monitor once)
6. Drag HDMI monitor icon to "Main:" then select Swap Devices.
User's Manual
Display Modes
B-3