Toshiba P200 Series User Manual page 154

USB
Refer also to your USB device's documentation.
Problem
USB device does not
work
TV output signal
Problem
Display on TV is poor
No display
If you turn the computer off in Sleep Mode while the display is on a TV, the
computer will select either the internal LCD or an external computer CRT
as the display device the next time it is switched on.
LAN
Problem
Cannot access LAN or
the Wake up on LAN
feature does not work
User's Manual
Procedure
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows documentation
for information on checking the drivers.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US) or PAL (Europe).
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 6,
If problems persist, contact your dealer.
Procedure
Check for a firm cable connection between the
LAN hub.
Make sure the AC adapter is connected. You
cannot access a LAN using the computer's
battery power.
If problems persist, consult your LAN
administrator.
Troubleshooting
The Keyboard.
10-11