Connecting An Antenna And Tv - Toshiba RD-XS52SU Owner's Manual

Connections

Connecting an antenna and TV

Connect your TV and the antenna to this recorder for recording and to view broadcast signals on the TV.
1
Disconnect the antenna cable from your TV, and connect it to the RF IN
(FROM ANT.) terminal on the recorder.
2
Using the supplied coaxial cable of this recorder, connect the RF OUT (TO
TV) terminal to the TV.
To RF IN (FROM ANT.)
HDMI OUTPUT
R L VIDEO S-VIDEO
INPUT1
INPUT3
R L VIDEO
S-VIDEO
IR
To RF OUT (TO TV)
For connecting to a cable box or a satellite system, see
Note
• This connection insures accessibility of broadcast signals to your TV only. Unlike a VCR, you can not assign channel 3 or 4
for playback of this recorder, because an antenna input only passes through in the recorder. You must connect this recorder
to a video input of your TV to enjoy playback picture from this recorder. (See the next page.)
20
Antenna cable (not supplied)
1
RF IN
(FROM ANT.)
RF OUT
(TO TV)
CHANNEL
CHANGE
VHF / UHF
2
Coaxial cable (supplied)
e.g.
VHF/UHF antenna
2
To antenna input
Antenna
splitter
(not supplied)
VHF/UHF
page 22 to 25.
TV
Types of an antenna terminal
may vary depending on the TV.
Check the type on your TV, and
connect properly using either
method as shown.