Avaya J129 Installing And Administering page 77

Parameter name
ENABLE_G722
ENABLE_G726
ENABLE_G729
ENABLE_HOLD_BUTTON
ENABLE_MODIFY_CONTACTS
ENABLE_MULTIPLE_CONTACT_
WARNING
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Default value Description
Value Operation
• 0: Disabled
• 1: Enabled
1 Specifies if the G.722 codec is enabled.
Value Operation
• 0: Disabled
• 1: Enabled
1 Specifies if the G.726 codec is enabled.
Value Operation
• 0: Disabled
• 1: Enabled
1 Specifies if the G.729A codec is enabled.
Value Operation
• 0: Disabled
• 1: Enabled without Annex B support (default).
• 2: Enabled with Annex B support.
1 Specifies whether a Hold softkey will be displayed
during an active call.
Value Operation
• 0: Hold softkey is not displayed.
• 1: Hold softkey is displayed (default).
Specifies if the list of contacts and the function of
the contacts application can be modified on the
phone.
Value Operation
• 0: No
• 1: Yes
Specifies if a warning message must be displayed
if there are multiple phones registered on a user's
behalf.
Value Operation
• 0: No
• 1: Yes
Comments on this document? infodev@avaya.com
List of configuration parameters
Table continues...
77