Using The Attachments; Charging The Battery Pack - Toro Power Plex 51690 Operator's Manual

40v max axial blower
Table of Contents

Advertisement

Using the Attachments

Use the provided attachments as needed.
Note: The Gutter Cleaner Kit (Model 51667) and Oscillating
Tube (Model 51664) are sold separately.
1. Gutter cleaner adaptor
2. Blower tube

Charging the Battery Pack

Important: Read all safety precautions.
Important: For best results, your battery pack should
be charged in a location where the temperature is more
than 0°C (32°F) but less than 50°C (122°F). To reduce the
risk of serious personal injury, do not store the battery
pack outside or in vehicles. Charging time increases if
you do not charge it within this range.
Note: At any time, press the battery-charge-indicator button
on the battery pack to display the current charge (LED
indicators).
1. Make sure that the vents on the battery are clear of any
dust and debris.
2. Line up the cavity in the battery pack
the tongue on the charger.
Figure 7
3. Oscillator/MPH insert
adapter
4. MPH insert
(Figure
1. Battery pack cavity
g194438
2. Battery pack terminals
3. Battery pack venting areas
3. Make sure that the vents on the battery charger are
clear of any dust and debris.
4. Slide the battery pack into the charger until it is fully
seated
8) with
1. Charger venting areas
2. Left indicator light
5. To remove the battery pack, slide the battery backward
out of the charger.
7
Figure 8
4. Battery-charge-indicator
button
5. LED indicators (current
charge)
(Figure
9).
Figure 9
3. Right indicator light
g192748
g194423

Advertisement

Table of Contents
loading

This manual is also suitable for:

Power plex 51690t

Table of Contents