Connecting and turning on
To conserve energy it is best to turn your TV off, although remember to leave it in Standby if the timer has
been set to record a digital broadcast.
video recorder
Before connecting any external equipment always make sure
that the power is OFF .
CONNECT THE AERIAL TO THE SOCKET ON THE BACK
OF THE TELEVISION.
When connecting your video recorder you must use a full
21-pin SCART lead AND an aerial cable.
Before running
Auto Tune
Standby.
or moving pictures which have a permanent still image superimposed i.e. broadcast network logos,
it is always advisable to reduce BOTH the brightness and contrast settings.
your new TV
The TV back connections...
the back of your TV
SCART 2
3
IN/OUT
put your video recorder to
If you use your television to display completely still images,
SETTING UP
1
SCART 3
SCART 1
IN
OUT
SAT
The AERIAL must go into the socket marked
1
the back of the TV.
AERIAL CABLE from the TV socket (marked VCR) to
2
AERIAL IN on back of the VCR.
SCART LEAD from Scart 2 on the back of the TV to
3
the IN/OUT SCART socket on the back of the VCR.
Without this, you will not be able to view videos or
record digital programmes.
6
2
on