Special Sound Features; Dolby Digital; Surround Set Up - Dolby Digital - Toshiba 32ZT29B Owner's Manual

Dolby Digital is available from DVD players, some games console players, etc. These must be connected
using a Scart or phono lead for the picture AND an optical or a coaxial cable for the sound see page 37.
Arrange the speakers around your normal viewing
positions (as shown on page 6) and then make sure that
the TV is set up as follows:
The DVD/Games console is connected to the TV using
1
phono leads to the COMPONENT VIDEO INPUT or a
Scart lead to Scart 3, and an optical or coaxial cable to
the optical/coaxial sockets, DA-1 or DA-2.
The Digital input-1
2
in the AV connection
EXT 3 if Scart 3 is used or EXT 4 if the equipment is
connected to COMPONENT VIDEO INPUT.
If external front speakers are connected
3
the external switch (found on the back
of the TV) is set to EXT. You will not hear the centre
channel without external front speakers connected.
Rear speakers are connected and the
4
option in the Surround set up
(See next page.)

SPECIAL SOUND FEATURES

Dolby Digital

(optical)/ Digital input-2 (coaxial)
menu (see page 25) is set to
Rear speaker
menu is set to YES.
Set the volume
1
Digital source and press the TV MENU button on the TV's remote control. Select the
Sound menu.
Press the Q button to highlight
2
Digital 3/2, which is an indication of the channels available from your current sound
source, see the table below.
Then press the R button and adjust the levels using the P or Q button to select the
3
centre and two rear speakers in turn. Press either the S or R button to adjust. The
number of adjustable speakers will depend upon the signal received from the DVD
player. To cancel the test press the EXIT button.
Dolby Digital
If you sit a long way from the TV and close to the rear
speakers the sound from the rear will reach you before
the sound from the front. You can use a higher setting
in the Delay time
Press the TV MENU button and from the
1
menu
With Delay time
2
to change the setting to a value that suits you.
Press EXIT when you have finished.
3
Adjustments
and balance of the front speakers to your preference. Play a Dolby
Surround
Dolby Digital
1/0
= Centre speaker only.
2/0
= Front Left and Front Right only.
2/1
= Front Left and Front Right +
Rear Left and Rear Right combined.
2/2
= Front Left and Front Right +
Independent Rear Left and Independent Rear Right.
3/0
= Front Left and Front Right and Centre.
No Rear Speakers.
3/1
= Front Left and Front Right and Centre +
Rear Left and Rear Right combined.
3/2 = Front Left and Front Right and Centre +
Independent Rear Left and Independent Rear Right.
28
DELAY TIME...
option to restore the correct balance.
select Surround set up.
highlighted, use the S or R button
and press R . Highlight the title, e.g. Dolby
Feature