Unblocking Programs Temporarily; Block Channel Function - Toshiba 32A41 Owner's Manual

Unblocking programs temporarily

1
If you try to watch a TV program that exceeds the rating
limits you set, the TV will enter into the program block
mode.
2
If you want to watch the blocked program temporarily,
press MUTE.
Press the Channel
Number buttons (0–9) to
enter your 4-digit PIN code.
If the number is correct, the
block mode will be
released.
After 1 second, the normal
picture will appear.
All blocking is disabled until the TV is turned off,
and will be enabled when the TV is turned on again.
If a wrong PIN code is
entered, the message,
"Incorrect PIN Code"
appears. Enter the code
again. See page 28 for
details on entering the PIN
code.
THIS PROGRAM HAS BEEN BLOCKED!
TV–PG L V
EXCEEDS SET LIMITS
PUSH MUTE TO ENTER PIN
CABLE 4
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
~~~–
SELECT[0-9] END[EXIT]
INCORRECT PIN CODE
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
~~~~
SELECT[0-9] END[EXIT]

BLOCK CHANNEL function

You can use the BLOCK CHANNEL function to block
specific channels. You will not be able to tune blocked
channels unless you clear the setting.
You can block a maximum of 4 TV channels and 4 CABLE
channels.
To block channels:
1
Select the channel you want to block.
2
While in the V-CHIP
CONTROL menu, press
t or s to select BLOCK
CHANNEL.
3
Press T or S to display the
BLOCK CHANNEL menu.
4
Press T or S to select
SET, and then press t or s
until the channel number to
be blocked ("2" in this
example) replaces "0" in
the menu.
5
Repeat steps 1–4 for other channels.
6
Tune the TV to another channel before turning off the
TV or the TV will be on a blocked channel the next time
you turn it on.
To unblock channels:
1
Repeat steps 2– 4 above,
selecting CLEAR in step 4
(instead of SET).
2
Press t or s until "0"
replaces the channel
numbers (this unblocks all
blocked channels; you
cannot unblock individual
channels).
3
Press EXIT to clear the on-screen display.
ENABLE BLOCKING : [Y]N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
MOVE[t s ] SELECT[T S ]
BLOCK CHANNEL
[SET]CLEAR
0 0 0 0
SELECT[T S ] SET[t s ]
END[EXIT]
BLOCK CHANNEL
[SET]CLEAR
0 0 0 2
SELECT[T S ] SET[t s ]
END[EXIT]
BLOCK CHANNEL
SET [CLEAR]
15 10 6 2
SELECT[T S ] CLEAR[t s ]
END[EXIT]
0 0 0 0
31