Watching Tv Programs Or Videotapes; Selecting A Tv Channel; Selecting The Video Input Source; About The Demo (Demonstration) Mode - Toshiba 32A41 Owner's Manual

Watching TV programs or videotapes

CHANNEL t/s
MENU TV / VIDEO VOLUME CHANNEL
MENU
T/S t/s
TV/VIDEO
POWER
RECALL MUTE
o
3
1 2
4 5 6
7 8 9
CH RTN
100 0 ENT
CH
MENU/
VOL VOL
ENTER
CH
TV
CABLE
VCR
EXIT
FAV CH TV/VIDEO
A
REC TV/VCR PLAY
STOP
PIP
STILL SOURCE
SLOW PAUSE REW
FF
PIP CH LOCATE SWAP
18

Selecting a TV channel

Select a channel in one of the following two ways:
G Scan through the programmed channels in numerical sequence:
– Press CHANNEL s to select the next higher channel.
– Press CHANNEL t to select the next lower channel.
– Continue pressing CHANNEL s or t to select the next programmed
POWER
channel.
G Select a channel directly:
– Press the Channel Number buttons (0–9 and 100).
– For example:
To select channel 4, press 0—4.
To select channel 38, press 3—8.
To select channel 125, press 100—2—5.
If you cannot select a specific channel, make sure the TV/CABLE function is
RECALL
set correctly (see page 16).

Selecting the video input source

You can use the TV/VIDEO button to view a signal coming from other video
Channel
equipment connected to your TV (such as a VCR or DVD player). See
Number
"Connecting your TV" on page 5.
Note: To operate your video equipment properly, refer to the instructions
provided with the video equipment.
1
Turn the TV and video equipment on.
2
Press TV/VIDEO to select VIDEO 1 or
CHANNEL
VIDEO 2. The selected source will be
s/t
displayed in purple.
EXIT
TV/VIDEO
3
Operate the video equipment normally.

About the DEMO (demonstration) mode

When the DEMO mode is activated, your TV automatically displays a variety
of its on-screen menus and special features. This function is provided for
demonstration purposes only.
To start the demo:
1
Press MENU until the Option menu is
displayed on-screen.
2
Press s or t until DEMO is displayed in
purple.
3
Press T or S to select START. The on-
screen demo starts after about 15 seconds.
To stop the demo:
1
Press EXIT or RECALL on the Remote, or select STOP in the menu.
TV
VID EO 1
VID EO 2
TO SELECT PUSH TV/VIDEO
LANGUAGE:[ENGLISH]FRANCAIS
ESPANOL
DEMO: [START]STOP
C.CAPT: C1 C2 C3 C4 T1
T2 T3 T4[OFF]
MOVE[t s] SELECT[T S]