Programming The Channel Memory; Tv/Cable Function; Ch Program Function - Toshiba 32A41 Owner's Manual

Programming the channel memory

The channel memory is the list of TV channels your TV stops on when you press CHANNEL L/M.
First, use the TV/CABLE and CH PROGRAM functions (below) to program all active channels in your area into the channel
memory. Then use the ADD/ERASE function (page 17) to add/erase individual channels in the memory.
CHANNEL t/s
MENU TV / VIDEO VOLUME CHANNEL
MENU
T/S t/s
POWER
RECALL MUTE
o
1 3
2
4
5 6
7 8 9
CH RTN
100 0
ENT
CH
T/S
MENU/
VOL VOL
ENTER
CH
MENU
TV
CABLE
VCR
EXIT
FAV CH TV/VIDEO
A
REC TV/VCR STOP PLAY
STILL SOURCE PIP
SLOW PAUSE REW
FF
PIP CH LOCATE SWAP
16

TV/CABLE function

1
Press MENU until the Setup menu is
displayed on-screen.
2
Press s or t until TV/CABLE is displayed
in purple.
POWER
3
Press T or S until the mode that
corresponds to your TV signal
system displays in purple.
TV: TV broadcast signals
(VHF channels 2 through 13 and
UHF channels 14 through 69)
CABLE: Cable TV signals
(Cable channels 1 through 125)

CH PROGRAM function

Channel
Number
Use the CH PROGRAM function to
automatically add all active channels to the
channel memory.
1
Press MENU until the Setup menu is
displayed on-screen.
2
Press s or t repeatedly until "CH
s/t PROGRAM" is displayed in purple.
CHANNEL
s/t
3
Press T or S to start channel programming.
The TV automatically cycles through all the
TV or CABLE channels (depending on the
mode selected), and stores the active
channels in the channel memory.
4
When channel programming is done, you
will see the message, "Ch Programming
Completed."
5
Press CHANNEL s or t to scan through
the programmed channels.
TIMER: 0 MIN
TV/CABLE: [TV]CABLE
CH PROGRAM
ADD/ERASE: [ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] SELECT[T S]
TIMER: 0 MIN
TV/CABLE: TV[CABLE]
CH PROGRAM
ADD/ERASE: [ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] SELECT[T S]
TIMER: 0 MIN
TV/CABLE: TV[CABLE]
CH PROGRAM
ADD/ERASE: [ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] START[T S]
CH PROGRAM
CABLE 24
CH PROGRAMMING
COMPLETED
CABLE 4