Add/Erase Function - Toshiba 32A41 Owner's Manual

ADD/ERASE function

After using the CH PROGRAM function to automatically program channels
into the channel memory, you can use the ADD/ERASE function to manually
add or erase individual channels, as follows:
1
Select the channel you want to add or erase. If you are adding a channel,
you must use the Channel Number buttons to select the channel.
2
Press MENU until the Setup menu is
displayed on-screen.
3
Press s or t until ADD/ERASE is
displayed in purple.
4
To add the channel:
Press T or S until ADD is displayed in
purple, indicating that the channel has been
added to the channel memory.
To erase the channel:
Press T or S until ERASE is displayed in
purple, indicating that the channel has been
erased from the channel memory.
5
Repeat steps 1–4 for other channels.
6
Press s or t to select another item in the menu, or press EXIT on the
remote control to return to viewing.
You have now finished programming the channel memory.
TIMER: 0 MIN
TV/CABLE: [TV]CABLE
CH PROGRAM
ADD/ERASE: [ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] SELECT[T S]
TIMER: 0 MIN
TV/CABLE: [TV]CABLE
CH PROGRAM
ADD/ERASE: ADD[ERASE]
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] SELECT[T S]
TIMER: 0 MIN
TV/CABLE: [TV]CABLE
CH PROGRAM
ADD/ERASE: [ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] SELECT[T S]
CABLE channel reference chart
Correspond-
Number on Number on
ing CABLE
this TV this TV
channel
1 A-8 67
5 5(A-7) 68
6 6(A-6) 69
14 A
15 B 92
16 C 93
94
34 U 95
35 V 96
36 W 97
37 AA 98
38 BB 99
100
60 XX 101
61 YY 102
62 ZZ
63 AAA 123
64 BBB 124
65 65 125
66 66
The above chart is typical of many cable
system channel allocations. If in doubt,
consult your cable company.
Correspond-
ing CABLE
channel
67
68
69
92
93
94
A-5
A-4
A-3
A-2
A-1
100
101
102
123
124
125
17