Assembly - Snapper SP60V Instruction Manual

UNPACKING
This product requires assembly.
• Carefully remove the product and any
accessories from the box. Make sure that all
items listed in the packing list are included.
• Inspect the tool carefully to make sure
no breakage or damage occurred during
shipping.
• Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the tool.
• If any parts are damaged or missing, please
call 1-800-317-7833.
WARNING:
or missing, do not operate this product until
the parts are replaced. Use of this product
with damaged or missing parts could result in
serious personal injury.
WARNING:
modify this product or create accessories not
recommended for use with this blower. Any
such alteration or modification is misuse and
could result in a hazardous condition leading to
possible serious personal injury.
WARNING:
until assembly is complete and you are
ready to mow. Failure to comply could result
in accidental starting and possible serious
personal injury.
WARNING:
without the proper safety devices in place
and working. Never operate the mower with
damaged safety devices. Operation of this
product with damaged or missing parts could
result in serious personal injury.
UNFOLDING AND ADJUSTING LOWER
HANDLE
WARNING:
handle improperly can damage the cables,
causing an unsafe operating condition.
• Do not damage the cables when folding or
unfolding the handle.

ASSEMBLY

If any parts are damaged
Do not attempt to
Do not insert battery
Never operate the mower
Folding or unfolding the
• If a cable is damaged, contact an Authorized
Service Dealer.
• Pull and rotate the handle knobs (1) 90°
to the unlocked position on both sides to
loosen the lower handles (2) on both sides.
• Move the lower handles to the operating
position. You may raise or lower the handle
to a position comfortable for you. There are
3 positions (3) for you to choose. Rotate the
handle knobs to the locked position to lock
the lower handle into position.
NOTE: Ensure both sides are set at the same
position for proper assembly.
2
Locked
position
8
1
(3) 3 positions
Unlocked
position