Snapper SP60V Instruction Manual page 16

21" 60v lawn mower
Table of Contents

Advertisement

STORING THE MOWER
The following steps should be taken in order
to prepare the lawn mower for storage.
• Clean the mower as described in the
previous section.
• Inspect the blade, and replace it or sharpen
it, if required (refer to the Maintenance
section).
• Store the mower in a dry, clean location. Do
not store it next to corrosive materials, such
as fertilizer or rock salt.
• Store the mower indoors, in a cool, dry
place, out of the reach of children. Do not
cover the lawn mower with a solid plastic
sheet. Plastic coverings trap moisture
around the mower, which causes rust and
corrosion.
• Remove the battery and store it in a cool
dry location, if possible. Charge the battery
every two months when not in use in order
to increase its life.
• Remove the battery and store in a secure
location out of the reach of children.
WARNING:
This battery must be
charged every 3 months while in storage to
maintain maximum capacity.
VERTICAL STORAGE FUNCTION
• Remove the battery from the mower.
• Remove the grass catcher bag.
• Rotate the handle knobs to the unlocked
position.
• Lower the handle assembly and rotate the
handle knobs to the locked position.
• Lift the mower by the front end to the
vertical position.
MAINTENANCE
16
Locked
position
Unlocked
position

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents