Grounding The Wlan Ap 8120-O - Avaya WLAN 8100 Series Installation Job Aid

Grounding the WLAN AP 8120-O

Before operating the WLAN AP 8120-O you must connect the unit to a proper ground. Complete the
following procedure to ground the WLAN AP 8120-O. Read and observe all safety warnings.
Procedure
1. Locate the enclosure cover bolt next to a ground signal.
2. Using an adjustable wrench, loosen the bolt.
3. Using the provided green ground wire, insert the spade lug underneath the bolt.
Figure 3: Grounding the WLAN AP 8120-O
4. Use an adjustable wrench to tighten the bolt, ensuring that the spade lug is securely in place
between the bolt and the washer.
5. Connect the other end of the green ground wire to an acceptable low-impedance Earth
ground using the shortest and most direct run.
June 2014 Installation Job Aid (English) for Avaya WLAN 8100 series- WLAN AP 8120-O
9