2. PRINTER SETUP
2.4 Loading the Media
(Cont.)
4. Install the other Media Holder onto the Supply Shaft from the
opposite side.
5. Turn the Locking Lever of the Media Holder to the "Close" position.
"Close" Position
Media
6. Set the Head Lever to the "OPEN" position.
7. Open the Top Cover and the Right Side Cover.
8. Open the Head Lock Plate ( ), and turn the Pinch Roller Lever
clockwise ( ) to release the Pinch Roller.
Head Lock Plate
E2- 5
ENGLISH VERSION EO1-33056
Head Lever
2.4 Loading the Media
Media Holder
Supply Shaft
Media Holder
Locking Lever
"OPEN"
position
Top Cover
Right Side Cover
Pinch Roller Lever