Toshiba GD-1250 Operator's Manual page 72

4 ADVANCED FUNCTIONS
Creating/modifying a relay station mailbox
You can create or modify the relay station mailbox.
1
Press the [FAX] button on the control panel.
P.20 "Basic procedures"
2
Press the [ADVANCED] tab, and then press [ITU MAILBOX].
This screen is the same as the one you see when you create the confidential/bulletin board mailbox.
P.68 "Creating the confidential or bulletin board mailbox"
3
In the "BOX TYPE" group, press [RELAY]. In the "MODE" group, press [BOX SETUP] or
[MODIFY], and then [OK].
If the selected mailbox is not set at the time of modification, an error message is displayed and you are unable to
proceed.
4
Press [BOX NUMBER] to display the entry screen. Key in the box number(s) (a
maximum of 20 digits), and then press [OK].
If you want to set a password (a maximum of 20 digits), key in the password in the same way as the box
number.
If the box number or password is incorrect, an error message is displayed and you are unable to proceed.
70 Mailbox Transmission