Recommended Paper - Toshiba e-STUDIO206 Operator's Manual

1 PREPARATION

Recommended paper

To ensure the best copy performance, TOSHIBA recommends the paper types listed below. If
you want to use paper other than that we recommend, contact your service technician.
Media type
Plain paper
THICK PAPER 1
THICK PAPER 2
Tracing paper
Sticker labels
Transparencies
*1 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other
than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.
Paper types not acceptable
Do not use the types of paper listed below since they may cause paper jams.
Damp paper
Creased paper
Wrinkled paper or paper prone to be curled
Paper whose surface is extremely smooth or rough
Do not use the types of paper listed below since they may cause an equipment malfunction.
Paper whose surface is specially treated
Paper once printed with other copiers or printers
Storing paper
Observe the following cautions when storing copy paper:
Wrap copy paper in its wrapping paper to prevent it from gathering dust.
Do not expose copy paper to direct sunlight.
Store copy paper in a damp-free place.
Store copy paper on a flat surface to prevent it from being creased or bent.
32 Preparation 2 - Placing Copy Paper
TGIS Paper/Neusiedler
Colour Copy/Neusiedler
Colour Copy/Neusiedler
Colour Copy/Neusiedler
Colour Copy/Neusiedler
2
75 g/m tracing paper
3478/Zweckform-Avery
*1 PP2500/3M
Product name
80 g/m
90 g/m
100 g/m
120 g/m
160 g/m
2
2
2
2
2